久久九九99精品久久久,欧美日韩视频精品一区二区,萌白酱国产福利一区二区,鲁呀鲁在线视频免费观看

只用于動物實驗研究等

Batch information

Ossila材料F8T2 CAS：210347-56-1

General Information

Ossila材料F8T2 CAS：210347-56-1

Chemical Structure

Chemical structure of Poly(9,9-dioctylfluorene-alt-bithiophene), F8T2, CAS No. 210347-56-1.

Poly(9,9-dioctylfluorene-alt-bithiophene), also known as F8T2, is a semiconducting material that is widely used in organic electronics such as organic photovoltaics, polymer light-emitting diodes (PLED) and organic field-effect transistors (OFETs). Comparing with poly-3-hexylthiophene, F8T2 has even higher mobilities of 0.1 cm²/V · s and relatively higher stability against chemical doping by environmental oxygen or residual impurities such as   sulphonic acid in the PEDOT/PSS ink. This enables devices with higher on-off current ratios exceeding 10⁵ and with better operating stability than printed poly-3-hexylthiophene devices[1].

The absorption in the blue region of F8T2 makes it an excellent donor polymer to blend with an acceptor having complementary spectrum or assemble a tandem cell with other low bandgap-conjugated polymers with absorption extended in the red region. 

Device structure	ITO/PEDOT:PSS/TFB/F8T2/Ca  [3]
Color	Green
Max. Luminance	23,400
Max. Current Efficiency	3.68 cd/A
Max. Power Efficiency	2.9 lm W−1

Literature and Reviews

1. Annealing effect of polymer bulk heterojunction solar cells based on polyfluorene and fullerene blend, J-H. Huang et al., Org. Electronics, 10, 27–33 (2009), doi:10.1016/j.orgel.2008.09.007.
2. High-Efficiency Polymer LEDs with Fast Response Times Fabricated via Selection of Electron-Injecting Conjugated Polyelectrolyte Backbone Structure, M. Suh et al., ACS Appl. Mater. Interfaces, (2015), DOI: 10.1021/acsami.5b07862.
3. On the use and influence of electron-blocking interlayers in polymer light-emitting diodes, R. Jin et al., Phys. Chem. Chem. Phys., 11, 3455-3462 (2009). DOI: 10.1039/B819200F.
4. High-Resolution Inkjet Printing of All-Polymer Transistor Circuits, H. Sirringhaus et al., Science, 290 (5499), 2123-2126 (2000), DOI: 10.1126/science.290.5499.2123.
5. Organic Light-Emitting Diodes Based on Poly(9,9-dioctylfluorene-co-bithiophene) (F8T2), P. Levermore et al., Adv. Funct. Mater., 19, 950–957 (2009); DOI: 10.1002/adfm.200801260.
6. Mobility enhancement in conjugated polymer field-effect transistors through chain alignment in a liquid-crystalline phase, H. Sirringhaus et al., Appl. Phys. Lett. 77, 406 (2000); http://dx.doi.org/10.1063/1.126991.
7. Annealing effect of polymer bulk heterojunction solar cells based on polyfluorene and fullerene blend, J-H. Huang et al., Org. Electronics, 10, 27–33 (2009), doi:10.1016/j.orgel.2008.09.007.
8. Hole mobility effect in the efficiency of bilayer heterojunction polymer/C60 photovoltaic cells, A. Macedo et al., Appl. Phys. Lett. 98, 253501 (2011); http://dx.doi.org/10.1063/1.3601476.